# Pocketlab Light & Exposure Converter (lux ↔ EV ↔ shutter) > Convert lux to exposure value and back, and get shutter speeds for common f-numbers. Converts an illuminance in lux into the photographic exposure value (EV at ISO 100) and back, or works out the EV of camera settings, with a table of shutter speeds for common apertures and an everyday comparison. It is the arithmetic behind the Pocketlab light meter, which estimates lux from the phone camera or a light sensor. Part of usefulweb.app (https://usefulweb.app/). Part of [Pocketlab](https://pocketlab.usefulweb.app/) (ownerApp: pocketlab). Results are deterministic calculations from the inputs and the listed assumptions; the API returns exactly what the web page shows. ## Use it - Human interface: https://pocketlablightexposure.usefulweb.app/ (interactive tool at https://pocketlablightexposure.usefulweb.app/tool) - JSON API: POST https://pocketlablightexposure.usefulweb.app/api/v1/calculate with a JSON object of inputs (schema: https://pocketlablightexposure.usefulweb.app/api/v1/tool) - OpenAPI: https://pocketlablightexposure.usefulweb.app/openapi.json - MCP (Streamable HTTP): https://pocketlablightexposure.usefulweb.app/mcp - tool `pocketlab_light_exposure` ## Inputs - mode (select): I have - lux (number): Illuminance - ev (number): Exposure value - fNumber (number): f-number - Camera mode: the aperture used. The shutter table always uses ISO below. - shutter (number): Exposure time - Camera mode: e.g. 0.008 for 1/125 s. - iso (number): ISO ## Method - Incident-light calibration with the meter constant C = 250: EV100 = log2(E × 100 / 250), so E = 2.5 × 2^EV100 lux. - Camera settings: EV100 = log2(N² / t) − log2(ISO / 100). The scene is then assumed to be average (18 % grey), so the lux figure is a rough estimate — the same assumption every reflected-light meter makes. - Shutter speeds for the f-numbers in the table: t = N² / 2^(EV100 + log2(ISO / 100)), rounded to the nearest standard speed. ## Limits - Phones are not calibrated light meters; expect about a factor of two. For workplace lighting checks use a calibrated lux meter.