Apps Part of Pocketlab

Pocketlab Light & Exposure Converter (lux ↔ EV ↔ shutter)

Convert lux to exposure value and back, and get shutter speeds for common f-numbers.

lx
EV
More options

Camera mode: the aperture used. The shutter table always uses ISO below.

s

Camera mode: e.g. 0.008 for 1/125 s.

Try an example: · ·

More about this tool

How it works

Converts an illuminance in lux into the photographic exposure value (EV at ISO 100) and back, or works out the EV of camera settings, with a table of shutter speeds for common apertures and an everyday comparison. It is the arithmetic behind the Pocketlab light meter, which estimates lux from the phone camera or a light sensor.

  • Incident-light calibration with the meter constant C = 250: EV100 = log2(E × 100 / 250), so E = 2.5 × 2^EV100 lux.
  • Camera settings: EV100 = log2(N² / t) − log2(ISO / 100). The scene is then assumed to be average (18 % grey), so the lux figure is a rough estimate — the same assumption every reflected-light meter makes.
  • Shutter speeds for the f-numbers in the table: t = N² / 2^(EV100 + log2(ISO / 100)), rounded to the nearest standard speed.

Phones are not calibrated light meters; expect about a factor of two. For workplace lighting checks use a calibrated lux meter.

Sources

Part of Pocketlab

  • Pocketlab Phone sensor instruments & measurement log

    Your phone as 14 pocket instruments, with a measurement log you can export and share.

    Open Pocketlab

Related tools

How to use the Pocketlab Light & Exposure Converter

Convert between illuminance in lux, exposure value and camera settings, and get shutter speeds for common apertures at your ISO.

What it is for

Light is measured in two worlds. Lighting planners and workplace rules talk about illuminance in lux; photographers talk about exposure value (EV) and the shutter speed, aperture and ISO that follow from it. This tool converts between them. Start from a lux reading, from an EV, or from the settings your camera picked, and you get the other values and a table of shutter speeds for common apertures.

The Pocketlab light meter uses the same conversions. Its camera estimate works like the Camera settings mode here.

The conversions are standard formulas. A lux figure worked out from camera settings is still only an estimate, and none of this replaces a calibrated lux meter for workplace checks.

Worked example

Your desk lamp gives 320 lx and you want to photograph a model on the desk at ISO 400. Choose Illuminance (lux), enter 320 and ISO 400. The tool reports:

  • EV at ISO 100: 7
  • EV at ISO 400: 9
  • About as bright as: a bright office or a workbench lamp

The shutter table at ISO 400 runs from f/1.4 at 1/250 s through f/2.8 at 1/60 s and f/8 at 1/8 s to f/16 at 1/2 s. At f/8, for depth of field, you would use a tripod.

The other way round: your phone camera chose f/1.8, 1/50 s, ISO 640 in the living room in the evening. In Camera settings mode the tool gives about 63 lx, EV 4.66 at ISO 100, "a living room in the evening".

How to read the result

Illuminance is the light falling on a surface, in lux. EV at ISO 100 is the usual way to state a light level as an exposure: each step of 1 EV doubles the light. EV at your ISO is the exposure your camera needs at that sensitivity.

The shutter table lists the exposure time for each aperture, rounded to the nearest standard speed. About as bright as gives a familiar comparison, from moonlight to direct sun.

Tips and common mistakes

  • Lux measures light falling on a surface. Measure where the work happens — on the desk, not facing the lamp.
  • Camera settings measure the light reflected by the scene. White walls make a room look brighter than it is, dark rooms look darker. Expect about a factor of two either way.
  • Use the camera's real values: many phones show them in the photo details (aperture, exposure time, ISO).
  • Doubling the ISO is one EV, so the shutter time halves. The table already takes your ISO into account.
  • Daylight changes fast. Compare lamps at night, or take both readings within a minute.

FAQ

Can I check whether my workplace is bright enough?

You can get a first impression, but rules differ by country and task and ask for a calibrated meter. Use this tool to compare lamps and places, then measure properly where it matters.

What does "sunny 16" mean?

In bright sun the correct exposure at f/16 is about 1/ISO seconds. That is EV 15 at ISO 100, which the tool converts to roughly 82,000 lx.

Why does my phone's light sensor show other values?

Phone light sensors sit behind the screen glass, look in one direction and are rarely calibrated. Use them to compare places, not as exact lux.

Which meter constant is used?

The incident-light constant C = 250, so EV 0 at ISO 100 equals 2.5 lx. Some meters use slightly different constants, which shifts results by a fraction of an EV.

Guide last updated:

For scripts and AI agents

  • JSON API: POST https://pocketlablightexposure.usefulweb.app/api/v1/calculate (same calculation as this page)
  • Interface description: OpenAPI 3.1 · AI guide: llms.txt
  • MCP server (Streamable HTTP): https://pocketlablightexposure.usefulweb.app/mcp · tool name pocketlab_light_exposure
Example request
curl -s -X POST https://pocketlablightexposure.usefulweb.app/api/v1/calculate \
  -H 'content-type: application/json' \
  -d '{"mode":"lux","lux":500,"iso":100}'
Feedback · ideas & bug reports welcome